To unpack the reed, place your thumb or finger under the side of the heel in space provided. Firmly pull up and the reed will pop right out of the case.
While Légère reeds are durable, they can easily be damaged if mishandled or dropped. It is best to always handle your reed by the heel.
Playing
There is no need to moisten a Légère reed, it will play like a pre-moistened cane reed directly from the box.
Place the reed on the mouthpiece in the same position that you would put a cane reed and secure it with a ligature. Test the reed’s response either on the instrument or alone. You should feel a quick attack that speaks instantly. If you do not feel a fast attack the reed position or strength is incorrect. Move the reed back and forth trying a variety of positions and continue testing. If you cannot find a position that works well and it feels like the strength is incorrect please make use of Légère’s Exchange of Strength program.
Once the attack feels correct play the reed for a couple minutes to warm it up. At this point, the reed is in playing condition. Depending on your playing style, the reed will need to be rotated after roughly 60 minutes. This is to extend the life of the reed, not improve your short-term tone. With proper rotation and care your reeds should last many months.
Storage and Cleaning
When you are finished playing on your reed, loosen the ligature and remove it from the mouthpiece. The reed can be cleaned periodically with water and a mild detergent. Légère single reeds should be stored in their original case from the package, or on a flat surfaced reed case.
Due to the fact that polypropylene is non-porous, it is very difficult for bacteria to build on your reed.
Modifying the Reed
Altering Légère reeds is not recommended. Bending stiffness is a function of elastic modulus and removing material will drastically reduce the strength of the reed. If you are interested in experimentation purchase reeds that are 0.5 to 1.0 step stronger than your appropriate strength.
If desired, the reeds can be scraped with fine sandpaper or a sharp blade, held perpendicular to the reed. They should be scraped from the top of the vamp towards the tip. Never sand or scrape against the grain of the reed.
Reeds that have been altered are not eligible for an exchange or refund. Clipping the reed with a conventional reed clipper is likely to cause longitudinal splits through the tip.
Due to the fact that polypropylene is non-porous, it is very difficult for bacteria to build on your reed.
